Sam India Begins Kanpur Metro’s Station Finishing Work

Uttar Pradesh Metro Rail Corporation (UPMRC) on Friday night announced on Twitter that station finishing works had commenced at IIT Kanpur Station on the 8.728 km priority corridor of Kanpur Metro’s 23.785 km Line-1 between IIT Kanpur and Motijheel.

Sam (India) Builtwell Pvt. Ltd. was awarded the Phase 1 project’s Rs. 150 crore contract for architectural and interior finishing works (Package KNPCC-04) at nine elevated stations back in September with a completion period of 14 months.

Finishing work has started on the priority section of Kanpur Metro (IIT to Motijheel). Metro stations are now beginning to take their form. Some pictures of the block work happening at the IIT station…

– UPMRC
Photo Copyright: UPMRCL

Afcons Infrastructure is rapidly building this section’s civil structure through a Rs 734.56 crore contract for Package KNPCC-02R awarded in September 2019.

As they complete each station’s civil structure, they will hand over the site to Sam India to perform minor civil and architectural finishing work which includes site development, water/sanitary installation, fire fighting, electrical & mechanical (E&M) works and installation of pre-engineered roofs.

The 9 stations on Kanpur’s Priority Corridor are located on NH34 (GT Road) at IIT Kanpur, Kalyanpur Railway Station, SPM Hospital, CSJM Kanpur University, Gurudev Chauraha, Geeta Nagar, Rawatpur Railway Station, Lala Lajpat Rai Hospital and Moti Jheel.

Priority Section of Kanpur Metro’s Line-1 – view Kanpur Metro map & information
Arch pieces of the roof’s PEB frame-work can be seen stored at the bottom leftPhoto Copyright: UPMRCL

UPMRC is chasing a deadline to start trial runs in November 2021 (no typo!) using their 3 coach Bombardier train-sets and then start commercial operations in December or latest by January 2022.

Even if they start operations in the summer of 2022, they will easily beat their past record in Lucknow where they took just 36 months from the start of construction by Larsen & Toubro (September 2014) to opening (September 2017) its 8.48 km priority corridor.

For more updates, check out the Kanpur section of The Metro Rail Guy!

– TMRG

written by

Global traveler who prefers mass rapid transit

10 Responses to "Sam India Begins Kanpur Metro’s Station Finishing Work"

  1. Abhishek Threja says:

    What about non priority section. Any bids invited

    Reply
  2. Anurag says:

    Is it new vacancy is coming in 2021 in UPMRC , for technical and Non – technical ?

    Reply
  3. Azhar ali says:

    Hi I m from Kanpur and experience as a safety professional over all experience in safety 5 + please let me know if safety officer

    Reply
  4. kumar gaurav says:

    CURRICULUM-VITAE
    Kumar Gaurav Goswami
    Contact : +918130031172
    Email Id : [email protected] `
    Address : B-85, J-Block, Main road Hastinapur, Meerut, Uttar Pradesh, 250404

    Snapshot:
    • 3 years of experience in areas of Project Management, civil finishing interior Execution and planning .
    • Civil Execution of Major Metro underground projects including underground Metro station finishing work and commercial building interior work.
    • Excellent relationship with management, analytical and negotiation skills with deftness in swiftly ramping up projects in co-ordination with clients, architects & consultants (PMC).
    • Monitoring performance and reviewed executions records for compliance with executions requirements and quality object for contract.
    • Maintaining the site office with updated codes & standards, specification and execution system document.
    • Monitoring All area of civil and interior work according to requirement of client.

    Career Objective:
    Looking for a challenging job opportunity along with responsibility as well as explore strength, technical, knowledge, experience and potential in a professional environment to meet the organization’s expectation.

    Employer Details:
    TSN Infrastructure Private Limited Feb2018 to Feb 2020
    360 Interior designs LLP March 2020
    Raj Fabcon interiors Private Limited Sep2020 to Present
    Projects:
    1: Underground Metro LKCC-06 for Tata Project (June 2017 – March 2019)
    Project Description: Design and construction of Tunnel from start of underground ramp (near Charbagh Metro station) to end of underground ramp (near K.D. Singh Babu Stadium Metro Station) including three underground metro station (Hussainganj, Sachivalaya and Hazratganj) including Architectural finishes, E&M, TVS, ECS etc. on North-South Corridor of Lucknow MRTS, Phase 1A Project at Lucknow, Uttar Pradesh, India.
    Client: Lucknow Metro Rail Corporation

    Key Responsibilities : Served as Finishing Site Engineer. Tackled finishing of 1.6 km underground metro stretch with two stations- Sachivalaya and hussenganj.
    Activities performed:
    • Working as a Junior Civil Engineer on project.
    • Creating development plans & project documentation.
    • Interacting with the client & understanding requirements.
    • Prepare schedule according to planning of project .
    • Check drawing and work order (BOQ) timely.
    • Check site front for civil finishing work.
    • Co-ordinate with structure team for front availability.
    • Co-ordinate with manpower for work is according to project drawing or not.
    • Check , approved items and materials is used or not.
    • Attend all meeting with client and discuss problems and make a schedule according to client requirement and discuss this with senior staff.
    2: (Itellion park) TATA TRIL Commercial Building IT SEZ Project (March 2019 – to present)
    Project Description: Commercial Building TOWER of 12th floors . every floor has two toilets and one Lift Lobby.
    Client: Tata Reality and Infrastructure .
    PMC: Tata consulting engineering.
    Key Responsibilities : Served as CIVIL Engineer. Taken Responsibility for interior of Tower – 1, including public area, Male and Female toilets and ground floor Double height Area.
    Activities performed:
    • Working as civil Engineer on project .
    • Creating development plans & project documentation.
    • Interacting with the client & understanding requirements.
    • Masonry Work and fly ash blocks for wall.
    • Plastering Work Plastering of roof and walls inside Plastering of outside walls
    • Tile flooring and cladding.
    • ceilings work false ceiling, gypsum ceiling, metal ceiling, Calsium silicate ceiling..
    • carpentry work such doors, JC shutter, ceiling pelmet, mirror panalling frames, trap doors and trim.
    • Paint inner and outer wall of staircase, service corridor , double height area ,texture paint.
    • Washbasin counter.
    • Cubical partitions of WC, glass partition of urinals
    • Applying putty for window frames, Fixing window frames.
    • Lacquered Glass and mirror glass work.
    • Sewage lines to pit.
    • Plumbing work .
    • Setup water pipes and sewage pipes.
    • Setup WC, Urinals, washbasin on washbasin counter,WC sistern on Ledge wall.
    • Close all water and sewage pipes with temporary caps.

    Summer Training of Internship:
    Company: Delhi Metro Rail Corporation
    Project Title: Construction of pile foundation and pile cap, pier, pier cap, U-girders, I-beam.
    Project Description-Delhi metro rail corporation is very strict for quality of the materials and worker safety. Delhi metro is a construction of metro bridge use a high tech design and make a heavy foundation like use heavy reinforcement and good quality of cement and pre-stressing of concrete .Delhi metro use a heavy crane for lifting pier cap and U-girders. My work in delhi metro was to make a details study of Delhi metro project.

    Degree/certificate Board/University School/College Year of passing percentage
    B Tech (civil) AKTU Lucknow NIET Greater Noida 2017 67%
    12th UP Board KIC Mawana 2012 72%
    10th UP Board SVM Hastinapur 2010 67%
    Academic Profile:

    Technical Skills:
    • Auto CADD 2D,3D (CIVIL)
    • Ms Excel
    • STAAD Pro.

    Extra-Curricular Activities:
    • 2 times Participated in Town Planning Competition one time 2nd position winner.
    • Attended College Training for civil engineering softwares (STAAD.Pro,SAP, MSExcel)
    • Attended 3 days training in IIT Delhi for 3D Printing software.

    Strength:
    • Leadership
    • Strong Management skills
    • Quick learner & decision maker
    • Leadership & sharp Analytical skill capabilities
    • Ability to work under pressure

    Personal Details:
    • Date of birth’s :14/10/1996
    • Father’s name :Ramkishore Goswami
    • Mother’s name :Rekha Goswami
    • Language known :English, Hindi .
    • Hobbies : Cricket , news, Listening Songs.
    • Permanent address : B-85, J Block, Main Road Hastinapur (Meerut) Up-250404

    Declaration:
    I do hereby declare that the above information is true to the best of my knowledge and belief. I bear the responsibility for the correctness of the above information.
    Kumar Gaurav Goswami Place : Gurgaon, Haryana

    Reply
  5. Mahaveer singh says:

    Earth wark

    Reply
  6. Rani chauhan says:

    Sir , i want to job in your kanpur metro project sam india , i have completed btechin mechenical engg /three. Yrs diploma in mechanical engg /CATIA /AUTO CAD /WORK ON SNC MCS , LIVE IN KANPUR , 9795802744

    Reply
  7. SHASHANK MISHRA says:

    any requirements for earthwork (debris)contractor, we good experience in soil excavation, cutting , dumping and compaction

    Reply
  8. Amrit Jaiswal says:

    Respected sir,
    I speaking on behalf of Shri Balaji and Sons,Kanpur. We are the stockist of Iron & steel plate, sheets and structures of angle, channels & beams as well as dealer of TMT Bars also of JSW & SAIL.
    Please contact for best competitive rates with best quality. Cos we are COMMITTED TO QUALITY, COMMITED TO YOU.

    Thank You
    Shri Balaji and Sons
    Amrit Jaiswal
    9696356487
    Partner.

    Reply

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply to Amrit Jaiswal Cancel reply

Your email address will not be published. Required fields are marked *